Manually Installing The Konica Minolta Postscript Driver On Windows Xp - Konica Minolta magicolor 2350 Reference Manual

2
Select Save this program
to disk when prompted.
Save the download file to a
new directory on your PC.
3
After the download is com-
plete, use Windows
Explorer to open the new
directory created in step 2.
4
Double-click on the .exe
file that was downloaded.
The .exe is a self-
extracting compressed file
that allows you to uncompress the installation files.
5
After the files are uncompressed, close the extract utility, and then con-
tinue with the installation steps described in the next section, beginning
with step 2.
Manually Installing the KONICA MINOLTA
PostScript Driver on Windows XP
The following assumes that you are installing the KONICA MINOLTA Post-
Script Driver for Windows XP for the first time.
Installing the PostScript Printer Driver
You would use similar steps to install the PCL driver.
1
If the driver you are installing is on the Software Utilities CD-ROM, make
sure that the CD-ROM is in your CD-ROM drive.
If the CD-ROM installation application starts, close the application before
continuing.
Manually Installing the KONICA
MINOLTA PostScript Driver on
Windows XP
Chapter 2.2—33