Konica Minolta Magicolor 2300W Installation Manual
Konica minolta magicolor 2300w: installation guide
Hide thumbs
Also See for Magicolor 2300W:
- User manual (156 pages) ,
- Service manual (176 pages) ,
- Supplementary manual (19 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Konica Minolta Magicolor 2300W
Summary of Contents for Konica Minolta Magicolor 2300W
- Page 1 2300W ® Installation Guide 1800707-002B...
-
Page 2: Proprietary Statement
Thank you for purchasing a KONICA MINOLTA printer. Trademarks The KONICA MINOLTA and KONICA MINOLTA logo are trademarks or registered trademarks of KONICA MINOLTA HOLDINGS, INC. magicolor is a trademark or registered trademark of KONICA MINOLTA PRINTING SOLUTIONS U.S.A., INC. -
Page 3: Getting Acquainted With Your Printer
Hardware Installation: You’re looking at this Guide document right now. This guide provides information about installation of the printer, the interface panel, and the control panel. User’s Guide Software Installation: This chapter guides you through software, driver, and Status Display installation. -
Page 4: Space Requirements
Space Requirements Top View Printer Parts The following illustrates the parts of your printer that are referred to through- out this guide, so please take some time to become familiar with them. Front View/Right Side View Output tray with output tray... - Page 5 Transfer belt OPC drum cartridge Waste toner bottle Toner cartridges (cyan/ magenta/ yellow/black) Right Inside View Fuser Misfeed-clearing dial (manual paper feed dial) Transfer roller View with Accessories Duplex option Duplex option cover Getting Acquainted with Your Printer...
-
Page 6: Setting Up Your Printer
Your printer weighs approximately 28 kg (62 lbs) with consumables. Be sure to have help when lifting and moving it. Do not plug in the printer until you are told to do so. We strongly suggest that you save the packaging materials in case you ever need to move or ship the printer. - Page 7 Close the two green fuser levers Close the right side door. Grasp the front door latch Remove the tape from the inside of the printer. Pressing on the transfer belt unit with one hand, take the tag attached to the transfer belt unit fixture with your other hand, and pull the fixture straight toward you.
-
Page 8: Installing The Tray 1 Media Support
Tray 1 (the multipurpose tray) is used for all supported media types, including envelopes, labels, Japanese-sized postcards, thick stock, and transparencies. Check http://printer.konicaminolta.net/support (click on Answer Base) for currently approved media. To order approved media, go to www.q-shop.com. For information about loading different types of media, refer to “Using Media”... -
Page 9: Installing Accessories
Installing accessories always requires that the printer be turned off and unplugged. If you purchased any additional printer accessories (such as a duplex option), then install them now. If installation instructions are included with the accessory, follow them. If not, instructions are included in the User’s Guide (in PDF on the Utilities and Documentation CD-ROM). -
Page 10: Plugging In/Turning On The Printer
Plugging in/Turning on the Printer Make sure the printer is turned off. Plug the printer power cord into the printer and into a dedicated, grounded, surge-protected electrical outlet. In compliance with UL guidelines, “The appliance inlet is considered to be the main disconnect device.”... -
Page 11: Install The Printer Driver
Install the Printer Driver In case the Found New Hardware wizard shows up, while connecting your PC with your printer, cancel it. Do not use Plug-and-Play or the Windows Add Printer Wizard. You must use the CD-ROM Installer in order to correctly install all neces- sary printer drivers and utilities. -
Page 12: Safety Information
Laser Safety This printer is a page printer which operates by means of a laser. There is no possibility of danger from the laser, provided the printer is operated according to the instructions in this manual. - Page 13 Laser Caution For United States Users—CDRH Regulations This printer is certified as a Class I laser product under the Regulation Performance Standard according to the Food, Drug, and Cosmetic Act of 1990. Compliance is mandatory for laser products marketed in the United States, and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S.
-
Page 14: Warranty Considerations
For information about your warranty, go to www. euro.konicaminolta.net. If KONICA MINOLTA printer failure or damage is found to be directly attrib- utable to the use of non-KONICA MINOLTA approved consumables, print media, and/or accessories, KONICA MINOLTA will not repair the printer free of charge.