Usb Connection; Ethertalk Connection - Konica Minolta magicolor 2350 Reference Manual

Macintosh OS 9—PPDs and Utilities Installation
OS 9 Step 1. Software Installation
a Insert the Software Utilities CD-ROM in your Macintosh's CD-ROM
drive.
If this screen does not appear, double-click the KONICA MINOLTA
CD-ROM icon on your Macintosh desktop.
b Double-click the Install icon.
c Follow the instructions on the screen to install the magicolor 2350
PPD and utilities.
d After the PPD and utilities installation is complete, choose Quit.
e When the system software installation is complete, remove the
CD-ROM and store it in a safe place.
OS 9 Step 2. Creating a Desktop Printer

USB Connection

a Plug one end of the USB cable into the Macintosh and the other into
the printer's USB port.
b Locate the Desktop Printer Utility.
If you cannot locate the Desktop Printer Utility on your Macintosh hard
disk, it can be found on your Macintosh's system CD-ROM.
c Double-click the Desktop Printer Utility icon to open the application.
The first window prompts you to select the type of desktop printer you
would like to create.
d Select Printer (USB), and select OK.
e Choose the Change button in the PostScript Printer Description sec-
tion. In the resulting window, select the magicolor 2350 PPD, and
choose Select.
f Choose the Change button in the USB Printer Selection section. In the
resulting window, select the magicolor 2350, and click OK.

EtherTalk Connection

a You can connect via Ethernet in either of two ways:
Plug one end of a crossover Ethernet cable into the Macintosh and
the other into the printer's Ethernet port.
Introduction
Chapter 1.2—13