Konica Minolta magicolor 2350 Reference Manual page 64

Customizing Driver Settings
To use the KONICA MINOLTA PostScript printer driver, SNMP must
be running and you must have Windows NT4 Service Pack 6 installed.
1
From the Start menu, choose Settings/Printers and locate the (new)
printer icon.
2
Right-click on the icon and choose Properties.
3
Choose the Settings tab.
If your printer connection uses bi-directional communication, the
options installed on the printer are automatically identified in the
Installed Options list. Only options that are not currently installed
on the printer display in the Available Options list.
4
In this tab you may
choose certain
"options" available on
your printer. To add an
available option to the
installed options list,
select the option and
then click Add. After
making selections,
select OK.
5
Select the Device
Settings tab.
In this tab you should
set the defaults that
are not print job
dependent, such as
the media size you
have in your tray(s).
6
Finish customizing the
settings and select
OK.
For additional
printer driver
information, refer to the printer driver's online help.
You may continue installing other utilities available on the Software
Utilities CD-ROM.
60—Chapter 2.5 Customizing Driver Settings