Konica Minolta magicolor 2350 Reference Manual page 229

Parameter
Auto-Sense Default
Menu
Select
Submit button
Reset button
Save Custom button
Restore Custom button Changes all parameter settings to the Custom
Restore Factory button Changes all parameter settings to the Factory
Emulation/PostScript
The Configuration/Emulation/Post-
Script window provides the following
parameters for configuration:
Menu
Select
* Click on
Configuration Page
Description
When Auto Default is selected as the Default
Emulation (see above), the printer samples the
incoming print job to try to determine the correct
emulation to use for the job. If the printer is unable
to discern the emulation of an incoming print job,
the setting for this parameter is used as the
emulation. Choices are
LINEPRINTER
PCL (Default)
POSTSCRIPT
Saves and applies any changes made to
parameter settings.
If you made changes to any of the parameter
settings but don't wish to apply the changes,
selecting this button restores the last submitted
parameter settings.
Saves the Current values of the parameters as the
Custom settings. Using the Restore Custom but-
ton, you can change the parameter settings back
to the Custom settings after changes are made.
values.
values.
to view this parameter in the printer's control panel menu.
225