Adjusting The Throttle Control Cables; Adjusting The Shift Cable - Yamaha F6AMH Service Manual

STEERING HANDLE
INSTALLING THE SETTERING HANDLE
(SHORT HANDLE OF F6AMH, F6BMH,
F8CMH)
Install:
Steering handle


NOTE:
Pass the stop switch lead wire under the
throttle wire and insert it in the grommet of
the bottom cowling.
INSTALLING THE SETTERING HANDLE
(LONG HANDLE OF F6AMH/F6MH,
F8CMH/F8MH)
Install:
Steering handle


NOTE:
Pass the stop switch lead wire together
with the throttle wire through the
corrugated tube, pass under the throttle
wire, and then insert in the grommet of the
bottom cowling.
ADJUSTING THE THROTTLE CONTROL
CABLES
Adjust:
Throttle cables


Refer to "ADJUSTING THE
THROTTLE CABLES" on page 3-6.
ADJUSTING THE SHIFT CABLE (LONG
HANDLE OF F6AMH/F6MH, F8CMH/
F8MH)
Adjust:
Shift cable


Refer to "ADJUSTING THE SHIFT
CONTROL CABLE" on page 3-4.
7-5