TRENDnet User's Guide
No: The sequential number of the network storage.
Type: The type of storage.
Server
Enter the IP address of your network storage.
Address:
File Path: Enter the shared folder as file path for network storage. You
can create a folder under the shared folder and make it a
network volume here. Just create the folder and enter the
correct path name here.
Capacity: Enter the size of the disk space you want to assign for this
storage. The minimum disk space requirement is 8GB. If you
do not want to limit the size and use the full physical disk
space, put number 0 in this field.
File System: Choose between NFS or CIFS for file system. If you assign the
network storage on a Windows® computer, set it to CIFS.
User Name: Enter the user name if the network storage requires user
name and password. Enter any non‐blank letters if no
authentication is required.
© Copyright 2016 TRENDnet. All Rights Reserved.
Tip: To create a network storage on your Windows® based system, create a
shared folder and then test your set up with another computer. Enter the IP
address of the computer here and enter the shared folder name with a
leading forward slash. For example, if you have a shared folder named "SMB",
enter "/SMB" in the File Path.
Password: Enter the password to access the network storage. Enter any
non‐blank letters if no authentication is required.
Click Save to save the changes. The camera may reboot to make the
network storage available. Go to the next section to format and manage
your network storage.
TV‐IP314PI
50