TRENDnet User's Guide
Front View
Ambient Light Sensor
Reset Button
Push and hold the reset button then power on the camera.
Keep holding the reset button for more than 10 seconds to
reset configuration to factory default.
Grounding
Connects to electric ground.
Screw
Lock Ring
Loosen to adjust the camera position. Tighten to hold the
camera position.
Ambient Light
Detects the brightness in the environment and enable
Sensor
day/night modes automatically.
IR LEDs
Infra‐red LEDs for night vision.
© Copyright 2016 TRENDnet. All Rights Reserved.
Mounting Holes
IR LEDs
Connectors
Grounding
Screw
Lock Ring
10/100 PoE Network Port
DC Power 12V DC 1A
TV‐IP314PI
Reset Button
Mounting Base
(Optional)
6