Table of Contents
Advertisement
7-40 User's Reference Guide
IP Easy Setup
The IP Easy Setup screen is where you enter information about your Netopia Router's:
I
Ethernet IP address
I
Ethernet Subnet mask
I
Domain Name
I
Domain Name Server IP address
I
Default gateway IP address
Whether to serve IP addresses or not
I
Consult with your network administrator to obtain the information you will need. For more information about
setting up IP, see
"IP Setup and Network Address Translation" on page
Ethernet IP Address:
Ethernet Subnet Mask:
Domain Name:
Primary Domain Name Server:
Secondary Domain Name Server:
Default IP Gateway:
IP Address Serving:
Number of Client IP Addresses:
1st Client IP Address:
PREVIOUS SCREEN
Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP attributes of your Netopia in this screen.
1.
Select Ethernet IP Address and enter the first IP address from the IP address range your ISP has given
you. This will be the Netopia Router's IP address.
If Network Address Translation is enabled in Easy Setup, the Ethernet IP Address defaults to an address
within a range reserved by the Internet address administration authority for use within private networks,
192.168.1.1.
Because this is a private network address, it should never be directly connected to the Internet. Using NAT
for all your WAN and IP configurations will ensure this restriction. See
Translation" on page 9-51
2.
Select Ethernet Subnet Mask and enter the subnet mask your ISP has given you. The Ethernet Subnet
Mask defaults to a standard class mask derived from the class of the Ethernet IP address you entered in
the previous step.
3.
Select Domain Name and enter the domain name your ISP has given you.
IP Easy Setup
of this guide for more information.
9-51.
192.168.1.1
255.255.255.0
173.166.4.10
0.0.0.0
173.166.1.1
On
100
192.168.1.100
NEXT SCREEN
"IP Setup and Network Address
Advertisement
Table of Contents
