Table of Contents
Advertisement
Console-based management is a menu-driven interface for the capabilities built in to the Netopia R910.
Console-based management provides access to a wide variety of features that the router supports. You can
customize these features for your individual setup. This chapter describes how to access the console-based
management screens.
This section covers the following topics:
"WAN configuration" on page 8-43
I
"System configuration screens" on page 8-44
I
"Navigating through the system configuration screens" on page 8-45
I
I
"System configuration features" on page 8-46
WAN configuration
To configure your Wide Area Network (WAN) connection, navigate to the WAN Configuration screen from the Main
Menu and select WAN Configuration, then WAN Ethernet Configuration.
The WAN Ethernet Configuration screen appears.
Address Translation Enabled:
Local WAN IP Address:
NAT Map List...
NAT Server List...
Filter Set...
Remove Filter Set
Receive RIP:
Enable PPP over Ethernet:
Wan Ethernet MAC Address:
Main
Menu
Configuration
WAN Ethernet Configuration
WAN
Yes
0.0.0.0
Easy-PAT List
Easy-Servers
Both
On
00:00:c5:70:03:4a
WAN and System Configuration 8-43
WAN Ethernet
Configuration
Advertisement
Table of Contents
