Ip Easy Setup - Netopia R6100 Reference Manual

IP Easy Setup

The IP Easy Setup screen is where you enter information about your Netopia Router's:
Ethernet IP address
Ethernet Subnet mask
Domain Name
Domain Name Server IP address(es)
Default gateway IP address
If necessary, consult with a network administrator to obtain the information you will need. For more information
about setting up IP, see
Ethernet IP Address:
Ethernet Subnet Mask:
Domain Name:
Primary Domain Name Server:
Secondary Domain Name Server:
Default IP Gateway:
IP Address Serving:
Number of Client IP Addresses:
1st Client Address:
PREVIOUS SCREEN
Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP & IPX attributes of your Netopia in this screen.
1. Select Ethernet IP Address and enter the first IP address from the IP address range your ISP has given
you. This will be the Netopia Router's IP address.
If Network Address Translation is enabled in the Easy Setup connection profile, the Ethernet IP Address
defaults to an address (192.168.1.1) within a range reserved by the Internet address administration
authority for use within private networks.
Because this is a private network address, it should never be directly connected to the Internet. Using NAT
for all your connection profiles will ensure this restriction. See
more information.
2. Select Ethernet Subnet Mask and enter the subnet mask your ISP has given you. The Ethernet Subnet
Mask defaults to a standard class mask derived from the class of the Ethernet IP address you entered in
the previous step.
3. Press the down arrow key until the editable field labeled Domain Name is highlighted.
"IP Setup" on page 10-1.
IP Easy Setup
192.168.1.1
255.255.255.0
isp.net
209.3.224.21
209.3.224.20
127.0.0.2
On
100
192.168.1.100
NEXT SCREEN
"IP Setup" on page 10-1
Easy Setup 7-7
of this guide for