What You Need; Identify The Connectors And Attach The Cables - Netopia R910 User Reference Manual

3-14 User's Reference Guide

What you need

Locate all items that you need for the installation.
Included in your router package are:
The Netopia R910 Ethernet Router
I
A power adapter and cord with a mini-DIN8 connector
I
Two RJ-45 cables (one for the Ethernet port on your PC; one for the Line port on the router)
I
I A DB-9 console cable
I A cross-over cable
I The Netopia CD containing an Internet browser, Adobe Acrobat Reader for Windows and Macintosh, ZTerm
terminal emulator software and NCSA Telnet for Macintosh, and documentation
You will need:
I A Windows 95, 98, 2000, or NT–based PC or a Macintosh computer with Ethernet connectivity for
configuring the Netopia R910. This may be built-in Ethernet or an add-on card, with TCP/IP installed and
configured. See "Hardware and operating system requirements" on page
An Internet modem such as a cable modem or DSL bridge connected to the appropriate wall outlet for your
I
Internet service source. Your Internet connection device must have a 10Base-T Ethernet port for
connecting it to the router's Line port.

Identify the connectors and attach the cables

Identify the connectors and switches on the back panel and attach the necessary Netopia Router cables.
The figure below displays the back of the Netopia R910 Ethernet Router.
Netopia R910 Ethernet Router back panel
Ethernet
4 port Ethernet hub
1. Connect the mini-DIN8 connector from the power adapter to the power port, and plug the other end into an
electrical outlet.
Console
Console port
5-23.
Line 1 port
Power
Line 1
Power port