Table of Contents
Advertisement
TFTP Server Name:
Firmware File Name:
GET ROUTER FIRMWARE FROM SERVER...
GET WAN MODULE FIRMWARE FROM SERVER...
Config File Name:
GET CONFIG FROM SERVER...
SEND CONFIG TO SERVER...
TFTP Transfer State -- Idle
TFTP Current Transfer Bytes -- 0
The sections below describe how to update the Netopia R910's firmware and how to download and upload
configuration files.
Updating firmware
Firmware updates may be available periodically from Netopia or from a site maintained by your organization's
network administrator.
There are two types of firmware in the Netopia R910 Ethernet Router: router firmware and WAN module
firmware. The router firmware governs how the router communicates with your network and the WAN module;
the WAN module firmware governs how the WAN module communicates with the remote site. WAN module
firmware is included on your Netopia CD for XMODEM transfer and later updates will be available on the Netopia
website. Router firmware updates are also periodically posted on the Netopia website.
To update either the router's or the internal WAN module's firmware, follow these steps:
I
Select TFTP Server Name and enter the server name or IP address of the TFTP server you will use. The
server name or IP address is available from the site where the server is located.
I
Select Firmware File Name and enter the name of the file you will download. The name of the file is
available from the site where the server is located. You may need to enter a file path along with the file
name (for example, bigroot/config/myfile).
Select GET ROUTER FIRMWARE FROM SERVER or GET WAN MODULE FIRMWARE FROM SERVER and
I
Trivial File Transfer Protocol (TFTP)
Utilities and Diagnostics 14-161
Advertisement
Table of Contents
