Table of Contents
Advertisement
11-106 User's Reference Guide
Profile Name:
Profile Enabled:
Data Link Encapsulation...
Data Link Options...
IP Enabled:
IP Profile Parameters...
Interface Group...
COMMIT
Configure a new Conn. Profile. Finished?
From the Data Link Encapsulation pop-up menu, select PPP.
Select Data Link Options and press Return.
The Datalink (PPP/MP) Options screen appears.
Data Compression...
Send Authentication...
Send User Name:
Send Password:
Receive User Name:
Receive Password:
Dial...
Dial on Demand:
Idle Timeout (seconds):
Maximum Packet Size:
Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.
Enter your User Name and Password and press Return. Press Escape to return to the Add Connection Profile
screen.
Select ADD PROFILE NOW and press Return. Your Connection Profile will be created and activated with your
authentication information to connect to your ISP's service.
Add Connection Profile
My_ISP
Yes
PPP
Yes
Primary
CANCEL
ADD or CANCEL to exit.
Datalink (PPP/MP) Options
Standard LZS
PAP
jagdip
*****
Dial In/Out
Yes
300
1500
Advertisement
Table of Contents
