Ip Easy Setup - Netopia R7200 User Reference Manual

7-6 User's Reference Guide
CHAP requires you to enter a Host Name and Secret in the next two fields.
PAP-TOKEN requires you to enter a User Name in the next field.
CACHE-TOKEN requires you to enter a User Name and Password in the next two fields.
4. Press the Down arrow key until you reach NEXT SCREEN. Press Return to bring up the next screen.

IP Easy Setup

The IP Easy Setup screen is where you enter information about your Netopia Router's:
Ethernet IP address
Ethernet Subnet mask
Domain Name
Domain Name Server IP address
Default gateway IP address
Consult with your network administrator to obtain the information you will need. For more information about
setting up IP, see "IP Setup and Network Address Translation" on page
Ethernet IP Address:
Ethernet Subnet Mask:
Domain Name:
Primary Domain Name Server:
Secondary Domain Name Server:
Default IP Gateway:
IP Address Serving:
Number of Client IP Addresses:
1st Client Address:
PREVIOUS SCREEN
Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP & IPX attributes of your Netopia in this screen.
1. Select Ethernet IP Address and enter the first IP address from the IP address range your ISP has given
you. This will be the Netopia Router's IP address.
If Network Address Translation is enabled in the Easy Setup connection profile, the Ethernet IP Address
defaults to an address (192.168.1.1) within a range reserved by the Internet address administration
authority for use within private networks.
Because this is a private network address, it should never be directly connected to the Internet. Using NAT
for all your connection profiles will ensure this restriction. See
on page 10-1 of this guide for more information.
IP Easy Setup
192.168.1.1
255.255.255.0
isp.net
209.3.224.21
209.3.224.20
127.0.0.2
On
100
192.168.1.100
NEXT SCREEN
"IP Setup and Network Address Translation"
10-1.