Netopia R5100 User Reference Manual page 77

Address Translation Enabled:
Local WAN IP Address:
Remote IP Address:
Remote IP Mask:
Filter Set...
Remove Filter Set
Receive RIP:
Toggle to Yes if this is a single IP address ISP account.
Configure IP requirements for a remote network connection here.
4. Toggle or enter any IP Parameters you require and return to the Add Connection Profile screen by pressing
Escape. For more information, see
5. If your router is enabled for IPX routing (see
IPX remote network, toggle IPX Enabled to Yes, and press Return. Otherwise, accept the default No. If IPX
routing is not enabled, this menu item does not appear.
If you enable IPX routing, an IPX Profile Parameters menu item becomes available. Select IPX Profile
Parameters and press Return. The IPX Profile Parameters screen appears.
Remote IPX Network:
Path Delay:
NetBios Packet Forwarding:
Incoming Packet Filter Set...
Outgoing Packet Filter Set...
Incoming SAP Filter Set...
Outgoing SAP Filter Set...
Periodic RIP Timer:
Periodic SAP Timer:
Configure IPX requirements for a remote network connection here.
IP Profile Parameters
Yes
0.0.0.0
0.0.0.0
0.0.0.0
Off
"IP Setup and Network Address Translation" on page
"IPX Setup" on page
IPX Profile Parameters
WAN and System Configuration 8-15
10-1) and you will be connecting with an
00000000
10
Off
<<NONE>>
<<NONE>>
<<NONE>>
<<NONE>>
60
60
9-1.