Table of Contents
Advertisement
6.
Select Data Link Encapsulation and highlight the method of encapsulation that you want to use from the
pop-up menu. The choices offered are PPP, HDLC, and Frame Relay. The default setting is Frame Relay.
Press Return.
7.
Select NEXT SCREEN and press Return. The Easy Setup Profile screen appears. See
The DDS Line Configuration screen appears.
Data Rate (kbps)...
Data Link Encapsulation...
TO MAIN MENU
Enter Information supplied to you by your telephone company.
1.
Select Data Rate and press Return. From the pop-up menu, highlight the data rate that you want your
DDS/ADN line connection to transmit at. The data rate choices are Automatic (the default), 56 kbps, and
64 kbps. Press Return.
Note: As noted above, DDS/ADN Netopia Routers may run 56 kbps or 64 kbps data rates on permanent
circuits. If you accept the default, Automatic, the router will hunt between modes until it can determine
what the telephone company has provisioned your DDS/ADN line for.
2.
Select Data Link Encapsulation and highlight the method of encapsulation that you want to use from the
pop-up menu. The choices offered are PPP, HDLC, and Frame Relay. The default setting is PPP. Press
Return.
3.
Select NEXT SCREEN and press Return. The Easy Setup Profile screen appears. See
DDS Line Configuration
Automatic
PPP
NEXT SCREEN
Easy Setup 7-5
page
7-6.
page
7-6.
Advertisement
Table of Contents
