Ipx Packet Filters; Ipx Packet Filter Sets; Ipx Sap Filters; Ipx Sap Filter Sets - Netopia R5100 User Reference Manual

13-24 User's Reference Guide
The items in the IPX Filters and Filter Sets screen are grouped into four areas:
IPX packet filters
IPX packet filter sets
IPX SAP filters
IPX SAP filter sets
The following sections explain the items in each of these areas.
For each IPX packet filter, you can configure a set of parameters to match on the source or destination
attributes of IPX data packets coming from or going to the WAN.
To display a view-only table of IPX packet filters, select Display/Change IPX Packet Filters in the IPX Filters and
Filter Sets screen.
To modify any of the filters in the table, note the desired filter and press Return to go to the Change Packet Filter
screen. The parameters in this screen are the same as the ones in the Add Packet Filter screen (see the next
section).
To add a new IPX packet filter, select Add IPX Packet Filter in the IPX Filters and Filter Sets screen and press
Return. The Add Packet Filter screen appears.
Filter Name:
Source Network:
Source Node Address:
Source Socket:
Destination Network:
Destination Node Address:
Destination Socket:
ADD FILTER NOW
Configure a new IPX Packet Filter. Finished?
By default, the filter's socket numbers and network and node addresses are null (all zeros). This sets the filter
to match on any IPX data packet. Configure the filter using criteria that meet your security needs.
Add Packet Filter
IPX Filter 1
00000000
000000000000
0000
00000000
000000000000
0000
CANCEL
ADD or CANCEL to exit.