Table of Contents
Advertisement
The following is a list of common SAP server types:
NetBIOS is a protocol that performs tasks related to the Transport and Session layers of the OSI model. It can
operate over IPX using a special broadcast packet known as "IPX Packet type 20" to communicate with IPX
NetBIOS servers.
The Netopia R5000 Series Router has several IPX features designed to restrict the traffic on the dial-up link
when the unit is not sending or receiving IPX data. When the link is idle and a user is logged into a Novell
server, the server will send keep-alive packets to ensure that the user is still there. If the link is idle, the
keep-alive packets will be sent back to the server by the locally connected Netopia R5000 Series Router as
though they came back from the user without bringing up the dial-up link.
SPX keep-alive packets are also treated in this manner. IPX RIP and SAP messages will not be sent if the link is
down. Together, these features enable the user to remain connected to a Novell server or SPX peer without
bringing up the dial-up link, except to send and receive actual user data.
Main
Menu
You will use the IPX Setup screen to configure the Ethernet side of the Netopia R5000 Series Router. The
information you enter controls how the router routes IPX traffic.
Unknown
Print Queue
File Server
Job Server
Print Server
Archive Server
Remote Bridge Server
Advertising Print Server
Reserved Up To
System
Configuration
0000h
0003h
0004h
0005h
0007h
0009h
0024h
0047h
8000h
Network
Protocols
Setup
IPX Setup 10-3
IPX Setup
Advertisement
Table of Contents
