Table of Contents
Advertisement
Current status
The current status section is a table showing the current status of the DSL connection. For example:
Profile Name----------Rate--%Use-Remote Address-----Est.-More Info------------
ISP
Profile Name: Lists the name of the connection profile being used, if any.
Rate: Shows the line rate for this connection.
%Use: Indicates the average percent utilization of the maximum capacity of the channels in use for the
connection.
Remote Address: Shows the IP address of the connected remote router.
Est: Indicates whether the connection was locally ("Lcl") or remotely ("Rmt") established.
More Info: Indicates the NAT address in use for this connection.
Status lights
This section shows the current real-time status of the Netopia 4553's status lights (LEDs). It is useful for
remotely monitoring the router's status. The Quick View screen's arrangement of LEDs corresponds to the
physical arrangement of LEDs on the router.
-PWR----ERROR----ETHERNET----DSL- - - - - - - - - - - - +--------LEDS---------
G
-
Each LED representation can report one of four states:
–: The LED is off.
R: The LED is red.
G: The LED is green.
Y: The LED is yellow.
The section
"Netopia 4553 Router status lights" on page 2-13
LED.
Current DSL Status
1536
10
IP 92.163.4.1
LED Status
-
-
Monitoring Tools 12-181
Lcl
NAT 192.163.100.6
| '-'= Off 'G'= Green
| 'R'= Red 'Y'= Yellow
describes the meanings of the colors for each
Advertisement
Table of Contents
