Table of Contents
Advertisement
7-42 User's Reference Guide
Auto-Detect DLCIs:
Multicast DLCI Number:
Toggle Auto-Detect DLCIs to Yes (the default) or No.
Select the Multicast DLCI Number field and enter a value.
5.
You can edit the Maximum Packet Size field, if you want packets limited to a lower value than 1500.
Return to the Add Connection Profile screen by pressing Escape.
6.
Select IP Profile Parameters and press Return. The IP Profile Parameters screen appears.
Address Translation Enabled:
IP Addressing...
NAT Map List...
NAT Server List...
Local WAN IP Address:
Local WAN IP Mask:
Filter Set...
Remove Filter Set
RIP Profile Options...
7.
Toggle or enter any IP Parameters you require and return to the Add Connection Profile screen by pressing
Escape. For more information, see
8.
Select COMMIT and press Return. Your new Connection Profile will be added.
If you want to view the Connection Profiles in your device, return to the WAN Configuration screen, and
select Display/Change Connection Profile. The list of Connection Profiles is displayed in a scrolling pop-up
screen.
Datalink (Frame Realy) Options
IP Profile Parameters
"IP Setup" on page
8-64.
Yes
0
Yes
Numbered
Easy-PAT List
Easy-Servers
0.0.0.0
0.0.0.0
Advertisement
Table of Contents
