Table of Contents
Advertisement
I
Select NAT Map List and press Return. A pop-up menu displays a list of your defined map lists.
Address Trans| <<None>>
NAT Map List.|
NAT Server Li|
Filter Set (F|
Remove Filter|
Receive RIP: |
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.
I
Select the map list you want to bind to the default profile and press Return. The map list you selected will
now be bound to the default profile.
I
Select NAT Server List and press Return. A pop-up menu displays a list of your defined server lists.
Address Trans| <<None>>
NAT Map List.|
NAT Server Li|
Filter Set (F|
Remove Filter|
Receive RIP: |
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.
Select the server list you want to bind to the default profile and press Return. The server list you selected
I
will now be bound to the default profile.
Note: There is no interdependency between NAT and IP Addressing. Also, the Local WAN IP Address and Mask
fields' visibility are dependent only on the IP Addressing type.
IP Parameters (Default Profile)
+--NAT Map List Name---+
+----------------------+
| Easy-PAT List
| my_map
|
|
|
|
|
|
|
|
+----------------------+
IP Parameters (Default Profile)
+-NAT Server List Name-+
+----------------------+
| Easy-Servers
| my_servers
|
|
|
|
|
|
|
|
+----------------------+
Multiple Network Address Translation 9-113
|
|
|s
|
|
|
|
|
|
|
|th
|
|
|
|
|
|
|
|s
|
|_first_map
|
|
|
|
|
|th
|
|
|
|
|
Advertisement
Table of Contents
