Factory Defaults; Transferring Configuration And Firmware Files With Tftp - Netopia 4553 User Reference Manual

13-198 User's Reference Guide

Factory defaults

You can reset the Netopia 4553 to its factory default settings. In the Utilities & Diagnostics screen, select
Revert to Factory Defaults and press Return. Select CONTINUE in the dialog box and press Return. The
Netopia 4553 will reboot and its settings will return to the factory defaults, deleting your configurations.
In an emergency, you can also use the Reset switch to return the router to its factory default settings. Call
Netopia Technical Support for instructions on using the Reset switch.
Note: Reset to factory defaults with caution. You will need to reconfigure all of your settings in the router.
If you lose your password and are unable to access the console screens, you can manually reset the router in
an emergency. See Appendix A, "Troubleshooting."
Transferring configuration and firmware files with TFTP
Trivial File Transfer Protocol (TFTP) is a method of transferring data over an IP network. TFTP is a client-server
application, with the router as the client. To use the Netopia 4553 as a TFTP client, a TFTP server must be
available. Netopia, Inc., has a public access TFTP server on the Internet where you can obtain the latest
firmware versions.
To use TFTP, select Trivial File Transfer Protocol (TFTP) in the Statistics & Diagnostics screen and press
Return. The Trivial File Transfer Protocol (TFTP) screen appears.
TFTP Server Name:
Firmware File Name:
GET ROUTER FIRMWARE FROM SERVER...
Config File Name:
GET CONFIG FROM SERVER...
SEND CONFIG TO SERVER...
TFTP Transfer State -- Idle
TFTP Current Transfer Bytes -- 0
The sections below describe how to update the Netopia 4553's firmware and how to download and upload
configuration files.
Trivial File Transfer Protocol (TFTP)