Table of Contents
Advertisement
10-140 User's Reference Guide
Configuring a Dial-Up Networking profile
Once you have created your Dial-Up Networking profile, you configure it for TCP/IP networking to allow you to
connect to the Internet through your Internet connection device. Do the following:
1.
Double-click the My Computer (or whatever you have named it) icon on your desktop.
Open the Dial-Up Networking folder. You will see the icon for the profile you created in the previous section.
2.
Right-click the icon and from the pop-up menu select Properties.
3.
In the Properties window click the Server Type button.
From the Type of Dial-up Server pull-down menu select the appropriate type of server for your system
version:
Windows 95 users select PPP: Windows 95, Windows NT 3.5, Internet
I
Windows 98 users select PPP: Windows 98, Windows NT Server, Internet
I
In the Allowed network protocols area check TCP/IP and uncheck all of the other checkboxes.
Note: Netopia's PPTP implementation does not currently support tunnelling of IPX and NetBEUI protocols.
Advertisement
Table of Contents
