Table of Contents
Advertisement
12-190 User's Reference Guide
A cold start trap is generated after the router is reset.
I
An interface down trap (ifDown) is generated when one of the router's interfaces, such as a port, stops
I
functioning or is disabled.
An interface up trap (ifUp) is generated when one of the router's interfaces, such as a port, begins
I
functioning.
The Netopia 4553 sends traps using UDP (for IP networks).
You can specify which SNMP managers are sent the IP traps generated by the Netopia 4553. Up to eight
receivers can be set. You can also review and remove IP traps.
To go to the IP Trap Receivers screen, select IP Trap Receivers. The IP Trap Receivers screen appears.
Return/Enter to modify an existing Trap Receiver.
Navigate from here to view, add, modify and delete IP Trap Receivers.
Setting the IP trap receivers
1.
Select Add IP Trap Receiver.
2.
Select Receiver IP Address or Domain Name. Enter the IP address or domain name of the SNMP manager
you want to receive the trap.
3.
Select Community String if you enabled one in the SNMP Setup screen, and enter the appropriate
password.
4.
Select Add Trap Receiver Now and press Return. You can add up to seven more receivers.
Viewing IP trap receivers
To display a view-only table of IP trap receivers, select Display/Change IP Trap Receiver in the IP Trap
Receivers screen.
Modifying IP trap receivers
1.
To edit an IP trap receiver, select Display/Change IP Trap Receiver in the IP Trap Receivers screen.
IP Trap Receivers
Display/Change IP Trap Receiver...
Add IP Trap Receiver...
Delete IP Trap Receiver...
Advertisement
Table of Contents
