How To Configure Wpa; How To Configure Wpa-Psk - NETGEAR WG302 Reference Manual

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

How to Configure WPA

Note: Not all wireless adapters support WPA. Furthermore, client software is required on the
client. Windows XP and Windows 2000 with Service Pack 3 do include the client software that
supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.
Consult the product document for your wireless adapter and WPA client software for instructions
on configuring WPA settings.
To configure WPA, follow these steps:
Log in at the default LAN address of
1.
admin and default password of password, or using whatever LAN address and password you
have set up.
Click Radius Server Settings in the Security menu.
2.
Enter the Radius settings.
3.
Click Apply to save your settings.
4.
Click WEP/WPA Settings in the Security menu.
5.
Choose WPA with Radius from the list.
6.
Click Apply to save your settings.
7.

How to Configure WPA-PSK

Note: Not all wireless adapters support WPA. Furthermore, client software is required on the
client. Windows XP and Windows 2000 with Service Pack 3 do include the client software that
supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.
Consult the product document for your wireless adapter and WPA client software for instructions
on configuring WPA settings.
To configure WPA-PSK, follow these steps:
Log in at the default LAN address of
1.
admin and default password of password, or using whatever LAN address and password you
have set up.
Click WEP/WPA Settings in the Security menu of the WG302.
2.
Basic Installation and Configuration
http://192.168.0.228 with the default user name of
http://192.168.0.228 with the default user name of
September 2004
3-22