How To Configure Wpa-Psk And/Or Wpa2-Psk - NETGEAR WAG102 Reference Manual

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG102

How to Configure WPA-PSK and/or WPA2-PSK

Note: Not all wireless adapters support WPA. Furthermore, client software is required on
the client. Windows XP and Windows 2000 with Service Pack 3 or above do
include the client software that supports WPA. Nevertheless, the wireless adapter
hardware and driver must also support WPA. Consult the product document for
your wireless adapter and WPA client software for instructions on configuring
WPA settings.
To configure WPA-PSK, follow these steps:
1. Log in at the default LAN address of
admin and default password of password, or using whatever LAN address and password you
have set up.
2. Click the WEP/WPA Settings link in the main menu of the WAG102.
3. Choose WPA-PSK, WPA2-PSK, or WPA-PSK and WPA2-PSK from the list.
WEP/WPA Settings 11a menu
Figure 3-15
4. Enter the pre-shared key passphrase.
3-30
http://192.168.0.232
WEP/WPA Settings 11b/g menu
v1.0, September 2005
with the default user name of
Basic Installation and Configuration