6.9.
Screen Film
Before performing these section procedures, remove the following parts.
(1) Remove the Cover Lower Assy., Cover L, and Cover Lower L. (See 6.1.1.)
(2) Remove the Cover Upper and Cover Upper L. (See 6.1.2.)
(3) Remove the Cover Upper R and Cover R. (See 6.1.3.)
(4) Remove the Cover Lower R and Roller Unit Cover. (See 6.1.4.)
(5) Remove the Scanner Assy. (See 6.2.2.)
(6) Remove the Motor Drive Unit. (See 6.3.)
1. Remove the 2 screws (A) and then remove the 2 Screen Guides Lower.
2. Remove the 3 screws (B) and then remove the 3 Screen Guides Upper.
3. Remove the Panaboard from the Wall-mounting Fixtures or optional Stand.
4. With the screen film surface facing up, lay the Panaboard on the Bench.
(Regarding Bench, refer to Sec. 6.8.)
59