3.3.4.
Installing Panaboard on a wall
1. Remove the 4 rivets.
Note:
To remove the rivets, turn them counterclockwise with a
screwdriver. (The fixed part of the rivets will be raised.)
2. Hang the 2 Wall-mounting Shafts of the unit to the Wall-mounting
Fixtures.
Note:
Ensure that the shafts fall into the grooves of the
Wall-mounting Fixtures. If the shafts do not fit to the
grooves, adjust the position of the Wall-mounting Fixtures.
3. Unscrew the 4 screws to remove the Cover Lower Assy.
4. Fasten the wall-mounting clasps of the unit securely to the wall
with the 4 appropriate Wall-mounting screws.
Note:
The 4 Wall-mounting screws are not included with the elec-
tronic board. Please purchase M6-size screws appropriate
for your wall.
5. Attach the Cover Lower Assy. again.
19