Wall Types And Installation Procedures - Panasonic UB-5838C Service Manual

3.6.3.

Wall Types and Installation Procedures

The method for attaching the Wall-mounting Fixtures to the wall will vary depending on the nature of the wall's structure.
Three available options are listed below.
Other methods may be necessary depending on the wall.
3.6.3.1. Metal or Concrete walls
Stud plugs (sold in stores) are needed.
3.6.3.2. Plasterboard walls
Split-wing toggles (sold in stores) are needed.
1. Drill eight holes in the wall.
For the correct hole size, refer to the instructions for the
particular stud plugs used.
2. Insert a stud plug in each hole.
3. Insert the bolt through a hole in the Wall-mounting Fixture
and tighten until the Wall-mounting Fixture is securely fixed
to the wall.
1. Insert the bolt through the hole in the Wall-mounting Fix-
ture and attach the split-wing toggle.Then insert the split-
wing toggle into the hole while the arms are horizontal.
For the correct hole size, refer to the instructions for the
particular split-wing toggles used.
2. After the arms expand, pull the Wall-mounting Fixture out
until the arms of the split-wing toggle grip firmly into the
wall.
3. Tighten the bolt until the Wall-mounting Fixture is securely
fixed to the wall.
27