5.4.
Requirements after replacing and servicing
After replacing or servicing the following assemblies or parts, some settings or confirmation will be required.
Replaced and serviced assemblies or
parts
CONTROL Board, Component parts on
CONTROL Board
MOTOR DRIVE Board, Component parts on
MOTOR DRIVE Board
SCANNER Board, Component parts on
SCANNER Board
Motor
Scanner Assy.
Action or confirmation
Check the firmware version.
Set the model.
Set the application areas/countries.
Clear the shading back-up data.
Check the scanning function.
Check the scanning function.
Clear the shading back-up data.
Check the scanning function.
Check the scanning function.
Clear the shading back-up data.
Check the scanning function.
39
Reference
See Sec.7.
See Sec.7.2.2.
See Sec.7.2.2.
See Sec. 7.2.
See Sec.3.4.
See Sec.3.4.
See Sec. 7.2.
See Sec.3.4.
See Sec.3.4.
See Sec. 7.2.
See Sec.3.4.