Installing The Thermal Transfer Film - Panasonic Panaboard UB-8325 Operating Instructions Manual

Installing the Thermal Transfer Film

Installing the Thermal
Transfer Film
Install the thermal transfer film in the printer.
1
Set the power switch to on ( I ).
• " " will flash on the Multi-Copy/Error
Indicator when the thermal transfer film has
run out.
• The screen will move to home position and
stop.
2
Push down the printer open lever and open
the printer door.
Printer door
3
Install the thermal transfer film.
1) Set the thermal transfer film, with the blue
gear in front, on the right.
18
ON
OFF
Blue gear
2) Insert the blue shaft into the front left hole.
3) Place the blue gear on the front right groove.
Blue gear
4) Place the white shaft on both sides of the back
grooves.
Blue shaft
White shaft