Panasonic UB-5838C Service Manual page 61

Note:
1. Must not remove Rings (A) on both sides of the Screen Sub-roller.
That removal may cause the pin to insert into the Roller Pipe to disable the roller attachment.
2. When installing the Screen Sub-roller to the Frame Unit, make sure to attach the side where the roller has the ** Bearing
(made of metal) to the upper side of the unit.
(This bearing is used as an earth connecting point for this unit by installing it to the unit.)
Screen Main-roller
Screen Sub-roller
13. Remove the 12 screws (A) and 2 screws (B). (For UB-5838C Series Only)
Remove the 8 screws (A) and 2 screws (B). (For UB-5338C Series Only)
14. Remove the 8 screws (C) and then remove the 4 Inner Panel Holders 2.
61