Panasonic UB-5838C Service Manual page 52

6.6.1.2. PANEL Board
1. Remove the Battery Holder from the Control Box Unit.
2. Remove the Panel Cable Harness from the PANEL Board.
3. Remove the screw that supports the Ground-lug.
4. Release the 4 hooks to remove the PANEL Board Assy.
5. Remove the 6 screws.
6. Release the PANEL Board, LCD, and other parts from the Operation Panel.
Note1: How to remove the LCD Cable Harness
Be sure to release the locking section on the harness in the direction of the arrow before pulling and removing it.
Note2: How to remove the LCD
Be sure to release the 2 hooks when removing the LCD from the Operation Panel.
52