Table of Contents
Advertisement
Using the Picture
Position
You can store up to five combinations of
lens settings (focus, window size, window
position) and aspect ratio, and you can recall
those settings.
1
Press the POSITION button.
The Picture Position selecting palette is
displayed.
2
Press the POSITION button
repeatedly, or press the M/m/
buttons to select the position.
The settings of the position selected is
recalled.
Store or delete the lens settings and
aspect ratio in the "Picture Position" of
the Screen
menu (1 page 38).
A position where lens settings and
aspect ratio are not stored is displayed as
"---."
Image of the lens moving
In the example below, the images with
aspect ratio of 1.78:1 (16:9) and 2.35:1 are
projected on a 2.35:1 screen.
When a 1.78:1 (16:9) image is input
When a 2.35:1 image is input
The 2.35:1 image expands to
fill the screen.
Notes
• After you have selected and confirmed the
lens position, the lens starts to move. Do not
touch, or place anything near, the lens,
otherwise it may cause injury or a
malfunction.
• If you press any button on the unit while the
lens is moving, the lens stops. In this case,
select the lens position again or adjust the
lens manually.
• The Picture Position function is not
guaranteed to reproduce the lens settings
precisely.
• When you use the subtended screen angle of
two or more aspects using lens zoom, install
the unit within the specified parameters
referring to "Projection distance" (1 page
78). With some setting positions, the range of
lens shift may be restricted, even though the
unit is installed within the specified
parameters.
Press the POSITION
button.
25
Advertisement
Table of Contents
