Table of Contents
Advertisement
Displaying the
Control Window of
the Unit with a Web
Browser
1
Connect the LAN cable.
LAN cable
(straight type)
(not supplied)
LAN Connector
Hub, router, etc.
2
Set the network settings for the
unit using "Network Setting" on
the Installation
page 48).
3
Start a web browser on the
computer, enter the following in
the address field, then press the
Enter key on your computer.
http://xxx.xxx.xxx.xxx
(xxx.xxx.xxx.xxx: IP address for the
unit)
You can confirm the IP address of the
unit under "Network Setting" on the
Installation
menu.
The following window appears in the
Web browser:
menu (1
Once you make the network settings,
you can open the Control window only
by performing step 3 of this procedure.
51
Advertisement
Table of Contents
