Projecting/Adjusting An Image; Projecting The Picture - Sony VPL-gt100 Operating Instructions Manual

Projecting/Adjusting an Image

This section describes how to operate the unit to view the picture from the equipment
connected to the unit. It also describes how to adjust the quality of the picture.
Projecting the
Picture
1
Power on both the unit and the
equipment connected to the
unit.
2
Press INPUT to display the input
palette on the screen.
3
Select the equipment from
which you want to display
images.
Press INPUT repeatedly or press M/m/
(enter) to select the equipment from
which to project.
Example: To view the picture from
the video equipment
connected to the HDMI
connector of this unit.
20
To view the picture from
Equipment connected to the
HDMI connector
Equipment connected to the
DisplayPort 1 connector
Equipment connected to the
DisplayPort 2 connector
Tips
• When "Auto Input Search" is set to "On" on
the Function menu, only input terminals
with effective signals are displayed in the
input palette.
• When "Status" is set to "Off" or "All Off" on
the Setup menu, the input palette does
not appear. Press the INPUT button to switch
between input terminals in sequence.
• When the "Control for HDMI" is set to "On"
on the Function menu, the input terminal
with effective signals is automatically
displayed, synchronizing with the operation
of the equipment connected to HDMI input
of the unit. (Only when the connected
equipment supports Control for HDMI
compatible.)
Press INPUT
to display
HDMI
DisplayPort 1
DisplayPort 2