Table of Contents
Advertisement
4
Select the menu language.
a Press M/m to select the Setup
press , or ENTER.
b Press M/m to select "
press , or ENTER.
c Press M/m/</, to select a language, then
press , or ENTER.
5
Press MENU to turn off the menu window.
menu, then
Language," then
Adjusting the Picture
Position
Project an image on the screen and then adjust the picture
position.
Tips
• The ?/1 (On/Standby), INPUT, MENU, and M/m/</,/
ENTER buttons on the side panel of the unit function the same as
those on the remote control. The LENS button functions in the
same way as the FOCUS, ZOOM, and SHIFT buttons of the
remote control.
• When adjusting the lens, each time you press the LENS button on
the unit, the lens adjustment function switches between "Lens
Focus," "Lens Zoom" and "Lens Shift."
Note
Depending on the installation location of the unit, you may not be
able to control it with the remote control. In this case, point the
remote control at the remote control detector of the unit or the screen.
1
Adjust the focus.
Press the FOCUS button to display the Lens Focus
adjustment window (test pattern). Then adjust the
focus of the picture by pressing the M/m/</,
buttons.
Tips
• When "Lens Control" is set to "Off" on the Installation
you cannot adjust the focus, the picture size or the proper position
by pressing the FOCUS, ZOOM or SHIFT buttons (page 29).
• When "Test Pattern" is set to "Off" on the Function
test pattern is not displayed (page 27).
Note
Adjust the lens by using buttons on the remote control or the control
panel of the unit. Never make adjustments by directly turning the
lens with your hands, which may cause damage or malfunction to the
unit.
8
menu,
menu, the
Advertisement
Table of Contents
