Connecting To A Workstation (V Split Display Connection) - Sony VPL-gt100 Operating Instructions Manual

Notes
• Use a high-speed HDMI cable. With a standard HDMI cable, images of 1080p, DeepColor, 3D
video and 4K video may not be displayed properly.
• When connecting an HDMI cable to the unit, make sure the
input of the unit and the
• If the picture from equipment connected to the unit with an HDMI cable is not correct, check the
settings of the connected equipment.

Connecting to a workstation (V Split display connection)

When connecting two DisplayPort cables to project a "4096 × 2160" or "3840 × 2160"
high resolution picture, connect DisplayPort output 1 and DisplayPort output 2 of the
workstation to DisplayPort input 1 and DisplayPort input 2 of the unit respectively.
Right side of the unit
: Video signal flow
Note
If no picture is projected with the workstation connected to the unit with DisplayPort cables, check
the settings of the workstation, or graphic boards.
16
v
mark on the connector of the cable is set at the same position.
DisplayPort cables (not supplied)
V
mark on the upper part of the HDMI
Workstation
DisplayPort output