Hardware Description; Wg602V3 Wireless Access Point Front Panel - NETGEAR WG602v3 Reference Manual

Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3
To qualify for product updates and product warranty registrations, we encourage you to register on
the NETGEAR Web site at: http://www.netgear.com.

Hardware Description

The NETGEAR WG602v3 54 Mbps Wireless Access Point front and rear hardware functions are
described below.

WG602v3 Wireless Access Point Front Panel

The WG602v3 Access Point provides three status LEDs.
Power
Figure 2-1: WG602v3 front panel
The following table explains the LED indicators:
LED DESCRIPTION
Power Power Indicator
No power. If this LED does not come on with the power adapter and cord correctly
Off
installed, see
Power is on.
On
Ethernet Ethernet LAN Link Activity Indicator
Off Indicates no Ethernet link detected.
Green On 100 Mbps Fast Ethernet link detected, no activity.
Green Blink Indicates data traffic on the 100Mbps Ethernet LAN.
Amber 0n 10 Mbps Ethernet link detected, no activity.
Amber Blink Indicates data traffic on the 10Mbps Ethernet LAN.
Introduction
Ethernet Wireless
Chapter 6, "Troubleshooting."
202-10060-02, February 2005
2-5