NETGEAR WG602v3 Reference Manual page 93

Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3
The WG602v3 Access Point incorporates Auto Uplink technology (also called MDI/MDIX).
TM
Each LOCAL Ethernet port will automatically sense whether the Ethernet cable plugged into the
port should have a normal connection (e.g. connecting to a PC) or an uplink connection (e.g.
connecting to a router, switch, or hub). That port will then configure itself to the correct
configuration. This feature also eliminates the need to worry about crossover cables, as Auto
Uplink TM will accommodate either type of cable to make the right connection.
Network, Routing, Firewall, and Cabling Basics C-15
202-10060-02, February 2005