Wg602V3 Wireless Access Point Rear Panel; Power Socket; Reset And Restore To Factory Defaults Button; Rj-45 Ethernet Port - NETGEAR WG602v3 Reference Manual

Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3
LED DESCRIPTION
Wireless Wireless LAN Link Activity Indicator
Off Indicates no wireless link detected.
Green On Wireless link enabled, no activity.
Green Blink Wireless link activity.

WG602v3 Wireless Access Point Rear Panel

Reset & Restore
Power
Button
Socket
Figure 2-2: WG602v3 rear panel

Power Socket

This socket connects to the WG602v3 power adapter.

Reset and Restore to Factory Defaults Button

The reset and restore to defaults button located between the Ethernet RJ-45 connector and the
power socket resets the WG602v3 when pushed once or restores to the factory default settings
when pushed and held for 10 seconds.

RJ-45 Ethernet Port

Use the WG602v3 Ethernet RJ-45 port to connect to an Ethernet LAN through a device such as
a hub, switch, or router.

Detachable Antenna

The WG602v3 provides a detachable antenna. Be sure the antenna is securely fastened.
2-6
Detachable
RJ-45 Ethernet
Antenna
Port
202-10060-02, February 2005
Introduction