Soap-Server Access Interface Vlan - HP ProCurve MSM310 Reference Manual

CLI commands
Config context

soap-server access interface vlan

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
soap-server access interface vlan <name>
Enables access to SOAP via this VLAN.
no soap-server access interface vlan <name>
Disables access to SOAP via this VLAN.
soap-server access port-1
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
soap-server access port-1
Enables SOAP access on the downstream port.
no soap-server access port-1
Blocks SOAP access on the downstream port.
soap-server access port-2
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
soap-server access port-2
Enables SOAP access on the upstream port.
no soap-server access port-2
Blocks SOAP access on the upstream port.
soap-server allow
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
soap-server allow <ip address>/<mask>
Adds a host to the list of IP addresses from which access to the SOAP interface is permitted.
no soap-server allow <ip address>/<mask>
Removes a host from the list of IP addresses from which access to the SOAP interface is
permitted.
Parameters
<address>
</mask>
soap-server http authentication
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
soap-server http authentication
Enable the SOAP server HTTP authentication.
no soap-server http authentication
Disable the SOAP server HTTP authentication.
2-26
IP address.
Subnet mask in CIDR format. Specifies the number of bits in the mask.