Web Admin Kickout - HP ProCurve MSM310 Reference Manual

CLI commands
Config context
<password>

web admin kickout

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
web admin kickout
Enables a new manager login to terminate an existing manager session.
no web admin kickout
Stops a new manager from logging in until an existing manager logs out.
web allow
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
web allow <ip address>/<mask>
Adds an address to the list of hosts that can access the management tool.
no web allow <ip address>/<mask>
Removes the specified address from the list of hosts that can access the management tool.
Parameters
<address>
</mask>
world-mode dot11 country code
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
world-mode dot11 country code <code>
Specifies the country in which the AP is operating.
Parameters
<code>
web access port-1
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
web access port-1
Enables access to the management tool via Port 2.
no web access port-1
Blocks access to the management tool via Port 2.
web access port-2
Supported on: MSM320 MSM310
web access port-2
Enables access to the management tool via Port 1.
2-14
New manager password. New password must be between 6 and 16
printable characters in length and contain at least 4 different characters.
Passwords are case sensitive. Space characters and double quotes cannot
be used. Passwords must also conform to the Security policy that is in
effect.
IP address.
Subnet mask in CIDR format. Specifies the number of bits in the mask.
An ISO3166 three-letter country code.