Promiscuous Mode Startup Delay - HP ProCurve MSM310 Reference Manual

CLI commands
Local mesh context
After loading new firmware or a new configuration file, the node waits 30 seconds before
restarting if a downstream link was established with another node in promiscuous mode. This
provides downstream nodes with additional time during which to download new firmware and
configuration files, thus improving the total convergence time of the entire network.

promiscuous mode startup delay

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
promiscuous mode startup delay <number>
Set delay in seconds before promiscuous mode starts (if enabled).
snr cost per hop
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snr cost per hop <number>
(Alternate Master, Slave only) This value is an estimate of the cost of a hop in terms of SNR. It
indicates how much SNR a node is willing to sacrifice in order to connect to node one hop closer
to the root node, because each hop has an impact on performance, especially when using a single
radio.)
2-77