Local Mesh Context - HP ProCurve MSM310 Reference Manual

Local mesh context

Path: View > Enable > Config > Local mesh
Use this context to configure local mesh links.
end
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
end
Switches to parent context.
active
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
active
Activates the local mesh profile.
no active
Deactivates the local mesh profile.
interface
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
interface (radio1 | radio2 | radio3)
Selects the interface to which this local mesh link applies.
no interface (radio1 | radio2 | radio3)
Selects the interface to remove for this local mesh link.
local mesh name
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
local mesh name <name>
Renames the current local mesh link.
remote mac
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
remote mac <address>
Sets the MAC address of the remote access point.
no remote mac
Deletes the MAC address of the remote access point.
Parameters
MAC address. Specify 6 pairs of hexadecimal numbers separated by
<address>
colons, with the values a to f in lowercase. For example: 00:00:00:0a:0f:01
CLI commands
Local mesh context
2-73