Part Names - Konica Minolta DRYPRO793 Installation Manual

Ch.1 Pre-installation Information
1.4

Part Names

DRYPRO 793 Part names required for installation are detailed below.
1.4.1 Front, Top and Left Sides
4) Exit Cover
5) Left Cover
1) Front Upper Cover
When a film jam occurs I the HPRO
(heat processing unit)/cooling unit, open
this cover to remove the jammed film.
This cover is also opened to replace the
deodorant filter.
2) Supply Tray 1
(Standard: 1 tray, with option: 3 trays)
Film is loaded in these trays.
3) Front Lower Cover
When a film jam occurs in the descent
or elevator transport units or the film
justification unit, this cover may be
opened to remove the jammed film. It is
also possible to access the film from
this opening and feed it through to the
left or right covers.
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
1) Front Upper Cover
2) Supply Tray 1
3) Front Lower Cover
4) Exit Cover
When a film jam occurs in the ejection
unit, this cover may be opened to
remove the jammed film.
5) Left Cover
When a film jam occurs in the descent
transport unit, this cover may be opened
to remove the jammed film.
This cover may also be removed to
carry out cleaning of the cleaning roller.
< 23 >