Ch.4 Checking Image Quality; Loading Film - Konica Minolta DRYPRO793 Installation Manual

Ch.4 Checking Image Quality

4.1 Loading Film

Film should be loaded after completion of DRYPRO 793 settings.
1
Do not place objects on or lean on the supply tray in extended position.
Doing so may cause damage.
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
1
Touch the [FILM SET] button.
- A message indicating that the tray is being open is
displayed.
- The supply tray will open a few centimeters and an
animated display of the film loading procedure
(pulling out the tray, removal of protective
cardboard sheet and light proof bag) shown.
2
Slowly pull the supply tray out to its fully
extended position.
3
Open the supply tray shutter.
< 138 >
Animated display of
procedure for pulling
out the tray, removal of
protective cardboard
sheet and light proof
bag.
The supply tray shutter
may be opened only
with the supply tray in
its fully extended
position.