Rear cover
・ Attach the double-stick tape (#127) and the monitor cover (#128) to the rear cover (#126) by aligning the
below red lines.
・ Attach the two spacers (#156) and (#155) based on the reference position.
・ Attach the rear cover.
・ In the numeric order from ① to ④, tighten the two screws (#203), and two screws (#204).
(After tightening these, there must be no step/level difference between the front and rear covers.)
#203
①
②
④
③
#204
#127
- A0 ・ L100 -
#128
Reference position
#155
Reference position
OK
O K
NG
N G
CABINET FRONT側が凸になっている状態
The state which has a level difference
in CABINET FRONT and CABINET BACK
INC
VMA43007-R.3780.A
#156