Nikon coolpix L100 Repair Manual page 41

INC
VMA43007-R.3780.A
・ Attach the two spacers (#114) based on the reference position (front cover side).
・ Mount the flash unit by raising it (pop-up).
・ Push down the flash unit, and tighten the two screws (#205).
Reference position
#114
Front cover side
#205
・ Solder the four wires ([Gray], [White], and [Black], [Brown]).
・ Apply the adhesive (C-8008B) to the wires ([Gray], [White], [Black], and [Brown]).
・ Solder the four wires ([Red], [Black], and [Gray], [White].
・ Solder the two wires ([Red], and [Black]).
・ Solder the four wires ([Gray], [Black], and [White], [Red]).
[Red/Black/Gray/White]
[Gray/Black/White/Red]
[Red/Black]
Adhesive : C-8008B
[Gray/White/Black/Brown]
- A1 ･ L100 -